Skip to main content

the renovation to the original high bay lights

System Luminous Efficacy: Luminaire luminous efficacy reached more than 80%. The result of recent testing LLRA120 street light effected by China National Lighting Fitting Quality Supervision Testing Centre proved that the system luminous efficacy is 108 lm/W. The expert of the led high bay centre highly appreciated the lamp.The renovated boulevard has 6 driveways in 2 directions with the green belt 7 meters large. All the street lights are erected on the two sides of the boulevard with pole-spacing 41m and pole height 13m. By testing in place, their maximal illuminance reaches 36 lux.

Yang Ming Road, 1.2km long, Arterial Street of Nanchang, situated in the city centre, has 8 traffic lanes in 2 directions. After the renovation to the original high bay lights, 205 units of LATTICELIGHTING LED street lights in total are installed along the street, including 77 units of LLRA192 street lights, 77 units of LLRA168 and 51 units of LLRA060 which are arranged symmetrically on the two sides of the road with pole-spacing 35m. By testing in place, the luminaire luminous efficacy is 79.0 lm/w, maximal illuminance 28 lux, minimal illuminance 13 lux and average illuminance 20 lux, illuminance uniformity 0.65, longitudinal illuminance 0.7.

emblematic architecture in Nanchang, is the first cable-stayed bridge in Jiangxi province, also the longest cable-stayed one in Nanchang. It has 6 driveways in 2 directions. 68 units of LLRA168 street lights produced by Jiangxi LatticeLighting Co., Ltd. with pole-spacing 32m are arranged bi-directionally and symmetrically. The pole height is of 11m with arm 1m and elevation of 15 degrees. The design data is as follows: luminous flux 14641lm, minimal led high bay light illuminance 22 lux, average illuminance 32 lux, illuminance uniformity 0.69, longitudinal uniformity of road 0.8. power density 0.65w/㎡. Calculated on the basis of 11hrs per day, all the lights consume only 149kwh of electricity per day.

Comments

Popular posts from this blog

Only imaginations brought the ceremony

In 1923, families gathered around the radio to listen as President Calvin Coolidge lit the first National Christmas Tree. Only imaginations brought the ceremony, and the tree located in what is now President’s led linear high bay light , to life. Eighty-nine years later, families are still gathering to witness the lighting of the National Christmas Tree, but 21st century technology is giving them a front-row seat. At 4:30 p.m. ET on Dec. 1, GE Lighting, in conjunction with the National Park Foundation, an official charitable partner of America’s national parks and the National Park Service, invites families to gather around the laptop to watch as the National Christmas Tree come to life. GE Lighting has been designing the National Christmas Tree, and contributing its lighting and decorations for 49 years.  The design process usually begins only a few months after the previous year’s lighting on the National Christmas Tree is shut off, often starting in March or earlier. Thoug...

In order to take maximum advantage of opportunities

Recently, China government promoted LED solid state lighting and listed Beijing as a level-one city for demonstration. Meanwhile, BOE's 8G plant scheduled to start mass production in 2011, LED backlight unit (BLU) demand from BOE was expected to surge. Additionally, Everlight was listed as one of BOE's backlighting suppliers. In order to take maximum advantage of opportunities, Everlight decided to set up a production plant in Beijing. Market sources noted, Currently all LED Linear high bay light notebook products were LED backlit. BOE's overall LED demand from its 5G and 6G plants was expected to exceed one billion chips in 2011, and to over seven billion chips when BOE's advanced production lines came online in the future. If BOE's 8G line fully adopted LED backlighting, BOE would need the support of about 20 LED production lines, or five billion LED chips per year, and generate CNY10 billion (US$1.5 billion) worth of industry value. The vertically-integrate...

winners will be recognized with personalized plaques acknowledging their lighting design achievements

The Award for Environmental Design gives special recognition to projects that minimize the use of energy, maximize the use of daylighting, control light pollution, and ensure system durability and maintainability. All qualifying entrants will be invited to an awards ceremony, which will take place Monday, April 22, 2013, in Philadelphia, Pennsylvania, USA, on the evening prior to the opening of LightFair International, the world’s largest annual architectural and commercial lighting trade show and conference. At that time, all winners will be recognized with personalized plaques acknowledging their lighting design achievements. The identity of the 2012 GE Edison Award Winner will remain confidential until announced at the awards ceremony. The winner will receive a personalized Steuben crystal trophy and continued publicity throughout the following year. A distinctive plaque also will be presented to the owner of the winning installation. The products manufactured in the plant is expect...