yahamledfloodlight

The SL-Dolphin Street Light series can be offered with 60W, 90W, 120W and 150W LED light engine power consumption and is capable of offering very high luminaire light output up to 13000lm. In addition, the series has been tested by authorities and graded as the most efficient street lights. With efficiencies reaching up to 75 lm/W, while installed on 8m poles, they provide improved brightness and high uniformity compared to traditional street lights installed on 12m poles, while offering up to 40% energy savings. Moreover, Everlight offers three different kinds of light engines - Phoenix for type IV light pattern, Trex for type III light pattern, and Venus for type II light pattern - applicable for road widths ranging from 6m to 12m. Everlight is the first in the industry to provide street lights with such a broad selection of light patterns. As a result, outdoor LED signs are becoming increasingly popular because it is a targeted medium that speaks to your most important audience, t...

Based on solid-state LED technology, the solution is energy efficient and can last up to 50,000 hours, allowing customers to install and forget about maintenance for up to 15 years. The flexible,  led high bay light  strands can be molded into nearly any shape, to provide designers unlimited options to enhance exterior and interior spaces.These bright, colorful, blazingly fast light strands are already a designer's favorite for intelligent decor, both indoors and outdoors," said Govi Rao, Lighting Science's Chairman and Chief Executive Officer. "Together with Martin, we intend to make the FlexDOT product available to leading designers and builders around the world. Founded in 1986 and headquartered in Aarhus, Denmark, Martin Professional is dedicated to the creation of dynamic lighting solutions for the entertainment, architectural, and commercial sectors. Martin lighting solutions are industry standard on top tours and events, grace prestigious theatres, energize n...

An elementary school bus hit a tree near a golf course outside Los Angeles on Thursday afternoon, injuring 11 students and the driver, authorities said. Anaheim Police Lt. Bob Dunn said two students and the driver were in critical condition, the Associated Press reported. The others suffered minor injuries. The Orange Unified School District bus left the road and went up an embankment about 3:40 p.m. near the Anaheim Hills Golf Course. TV images showed the battered yellow coach leaning against a tree. Firefighters had to free the trapped driver, who was not identified. The children are enrolled at El Rancho Charter School, about 30 miles east of downtown Los Angeles. Administrators were on the scene, the district said onFacebook. Andrea Shurtz, who witnessed the crash, told KABC-TV the bus "came flying down the hill and went curb airborne and took out trees along the way." "The kids are screaming for us," she said, adding that bystanders were "tryi...

It is know that LED light bulbs are to be treated for heat dissipation and to have uniform lighting. Solution from LIQUIDLEDS is to use “liquid” in LIQUIDLEDS LED light bulbs.  With the technology of Liquid Immersed Thermal Management Solution, the liquid not only acts as an excellent medium for heat dissipation of light bulbs but also helps reshaping the luminosity in the beam angle as well as uniform lighting of the light bulbs.LED lights are designed for stylish architectural  led high bay light  or for landscape lighting, as well as spot lighting points of attraction or for public lighting as needed. The LED light unit has a mounting bracket so it can be secured with bolts anywhere it is needed.The white LED modules used in the two units were manufactured by Nichia Kagaku Kogyo KK and consist of four elements. The modules were also used in the LED headlight of the Toyota’s "RX450h", which was released in April 2009, according to Koito Seisakusho. Seisakusho use...

Organized by the American Lighting Association (ALA), the U.S. Department of Energy (represented by Pacific Northwest National Laboratory), and the Consortium for Energy Efficiency (CEE), Lighting for Tomorrow is a design and technology competition organized to increase the market availability of energy-efficient residential lighting fixtures and to increase the marketing, promotion, and sales of such fixtures through retailers and the primary distribution channels for the new construction and renovation markets. Lighting for Tomorrow will be utilizing the OnSpeX laboratory as a venue to evaluate and judge newly-designed energy-efficient residential lighting fixtures. Such fixtures use advanced energy-efficient fluorescent and LED light sources instead of conventional incandescent bulbs. The OnSpeX facilities were chosen because of the technical instrumentation requirements and the expertise of the OnSpeX staff.This year, the competition is seeking new advanced compact fluorescent la...

BLK is a newly established LED company formed in 2008 by CNT International to accelerate the commercialization of BluGlass’ unique technology in the rapidly expanding Korean marketplace. It is headed by a strong LED executive team and is employing leading experts from the Korean LED industry to establish its activities and facility. ‘BLK installs great hope in the RPCVD technology, which it believes has potential to change for the better the manufacturing front of nitride based semiconductors’ said BLK President, Brian Park today.BluGlass is furthering negotiations with BLK to establish a Joint Development Agreement where BLK will participate in the final optimisation of the RPCVD technology to advance its speed to the mainstream market.Though most people think of LEDs as the lights blinking from inside electronic devices, they are being used increasingly to light rooms. By law, bulbs must be 30 percent more efficient than current incandescent versions beginning that year. While comp...

The two parties, also two of the largest lighting companies in Europe, have signed the agreement for current and future patent rights in the fields of lighting electronics and solid-state lighting, with the agreement mainly covering driver and control technologies for changing intensity and color of conventional and SSL-based systems.As a result of the agreement, the customers of TridonicAtco and Ledon will be exempted from paying royalties to YAHAM under the terms of its LED-based luminaires licensing program. A similar arrangement was reached between YAHAM and Osram in September 2008.We are very pleased that we have been able to further exploit the outstanding technology position of the Zumtobel Group through this comprehensive cross-licensing agreement," said Zumtobel Group CEO Andreas Ludwig. Rudy Provoost, CEO of YAHAM Lighting: LED lighting is transforming the lighting industry, enabling new and highly energy-efficient applications. By licensing our technology we are able ...

Toshiba is exhibiting at the Milan Salone, one of the world’s premier exhibitions of furniture and interior design, to introduce its new lighting business to Europe. The first exhibition of Toshiba on the Salone from April 22 to 27 at Milan’s Design Library is themed as ‘ led high bay light ’, and it will bring to life Toshiba’s philosophy on light and lighting and its importance to life.Having produced Japan’s first light bulb in 1890, Toshiba has over a century of experience in lighting products. Today, the company’s strengths lie in bringing high levels of energy efficiency to practical lighting applications, with no compromises in light quality or ambience. The company’s LED lights, already a success in Japan include light bulbs, down lights, base lights and street lights. We are going to end production of incandescent lamps in 2010, in favor of energy-efficient, environmentally-friendly alternatives, such as LED lamps and fluorescent lamps.” said Mr. Kuniaki Kumamaru, General Ma...

Two types of input/output were offered by the company, an isolated type and a non-isolated type. The price "varies depending on the amount but ranges from ￥500 (approx US$5) to ￥600, which is almost equivalent to that of existing products," the company said.YAHAM Lighting Technology has launched a brand new street light, the Lodestar  led high bay light . The benefit of this street light is that it’s developed with a light weight design. It can work almost anywhere in the world, suitable with -40°C to 40°C ambient temperature. The most important is that it’s built with our most advanced LED street lighting technology for excellent stability and high performance. It has surpassed all of our previous street lights in that it provides better performance and lighting. Some of its key features in its design include an aerospace structure to ensure optimal cooling. The PFC is up to 0.99 which offers a stable voltage output which can reduce energy consumption. It also meets the IP...

LED lights offer many advantages and benefits compared to traditional Filament and CFL products, such as directional lighting, which is ideal for torches, streetlights and spotlights. There are no starting problems in cold environments because LED’s are “Instant on” with no warm up time needed as seen in conventional CFL lighting. In addition, led high bay light  solutions do not contain environmentally hazardous metals such as mercury or sodium and do not emit potentially harmful Ultraviolet radiation or Infrared radiation like Halogen lamps. Another benefit is the extremely long life cycle of around 30 000 hrs which lowers maintenance costs in the long term.GlacialTech is developing a comprehensive range of products under the GlacialLight brand, stretching from street lighting solutions to all forms of industrial and architectural lighting. The products on offer and in development include serious product enhancements over the current range of competing products available on the m...

Specifically designed for high-power LEDs (for example, in the 0.5W, 1W or 3W range), the BCR 450 in combination with an external transistor offers precise current control, thermal protection, and over-voltage and over-current protection functions. By simply changing the external transistor, manufacturers of LED lighting have the flexibility to adapt output currents from 100mA to above 1A. The new driver IC produces no electromagnetic radiation, thus is ideal for applications sensitive against EMI, such as lighting in transportation vehicles including buses, ships, trains and aircrafts, as well as medical applications with communication bus systems. Except the general lighting systems, it can also be applied in architectural and accent lighting, advertising, strobe lights for emergency vehicles, hazard lights and road safety lights. Due to a small PCB space, the BCR 450 features an application circuit which is free of inductors, capacitors and free-wheeling diode. The e...

The online tool, accessible via cree’s website, Cree notes PCT allows users to easily characterize any XLamp? LED over a wide range of operating conditions, including drive current, flux bin, price and junction temperature. It also calculates metrics such as lumen output, lumens per watt, lumens per dollar and more.YAHAM’s PCT introduces advanced functionality not commercially offered by any other LED supplier. PCT can perform simple LED system design based on a target total lumen output, calculating parameters such as number of LEDs required and total system efficacy. The calculated system parameters take into account electrical, optical and thermal losses associated with LED system performance. In addition, PCT allows users to compare up to three different XLamp LED configurations at once, empowering customers to best choose between the industry-leading XLamp XR, MC and XP package families. The Product Characterization Tool acts like an interactive data sheet, giving users a more ...

The second generation of L-BOT? technology therefore enables the directing of light specifically to the intended surface in a direct manner, resulting in good uniformity and minimum lumen loss. Typically, the LED Street Light 240 provides the luminance as high as 24lux (average) and 32lux (maximum) at 12 meter height. This means that Neo-Neon? and thier leading team of researchers, engineers, and production management has provided a solution that reachs the CIE Standards for traffic arterial roadways, expressways and even freeways. This new development places Neo-Neon? at the forefront leading position of the  led high bay light  luminaries industry.As energy costs continue to rise globally and the adverse financial condition affects national, state, provincial government budgets the LED Street Light 240 offers an opportunity for relief. Due to the 56% power savings with the application of the Neo-Neon? LED 240 Street light compared to the traditional high energy consumin...

Sharp notes the new LED components are made for the use in versatile application areas, which require a high amount of brightness with a compact form factor at the same time. This gives designers more freedom and flexibility when creating illumination systems. Besides common applications such as backlighting for LCDs or keypads chip LEDs are used for example for general illumination, surgical spotlights, as status signals for industrial applications and for indoor mood lamps as well.Due to different phosphor mixtures the LEDs reach a colour rendering index (CRI) of up to 90 for a highly genuine reproduction of colours and details, Colour temperatures of white  led high bay light  are in the range of 2.200K to 11.500K.They are available with radiation angles of 120° and 130°. The white LEDs generate a light output of up to 6.4 cd at a power consumption of 0.01 to 0.2 W. In any case the white light LED chips are of convincingly compact design, as standard 3228 package wit...

The president of Neo Neon stresses that their strategy is always minimize production costs to quickly gain market share. Investing in fully-integrated LED manufacturing enables them to escape the fate of conventional lighting manufacturers, who are relegated to do exclusively assembly for their operations are dictated by key-component suppliers.Randy Cheng, general manager of Neo-Neon’s Taiwan branch, says the investment has enabled them to cut costs of LED lights faster than projected. Cheng touts that the group’s LED production is much more cost-competitive than rivals’ for streamlined production. The chips will be installed in both indoor and outdoor lighting turned out by Neo Neon. The Taiwanese-founded company is headquartered in Guangdong Province of mainland China, where its factory is built on 300 acres and outfitted with five German-made, high-performance metal organic chemical vapor deposition (MOCVD) chambers to turn out 12,500 wafers with some 400 million chips initially,...

Alan Bennett, vice president of sales for OPTEK Technology notes that the OUE8A Series UV LEDs eliminate any environmental concerns associated with the disposal of traditional mercury UV lamps. Not only do these devices allow customers to target specific applications with the narrow wavelength emission, but they are able to do so while eliminating any mercury hazard.The company says its  led high bay light  are ideal for medical and industrial applications including phototherapy treatment, dental applications, fluorescence and ultraviolet-visible spectroscopy; photo-catalyst curing of inks, coatings and adhesives; as well as paper currency and document validation. Additional applications for the OUE8A Series UV LEDs include aircraft coatings and biohazard detection equipment/systems, skin dermatology, forensics, and automotive oil, A/C, and fluid detection.YAHAM is a leading manufacturing and solutions provider for sensing and illumination covering the infrared, visible a...

BenQ is revolutionizing the pocket projector industry and award-winning PhlatLight LEDs are a key in providing their customers with the industry’s best products, said Po Su, Marketing Director at  led high bay light  America. He said their next-generation pocket projectors are flexible, making them ideal for multiple applications like home movies and gaming, as well as meeting room demos and mobile business presentations. LG Innotek is headquartered in Seoul Korea with several manufacturing sites in China, Indonesia, Poland and Mexico. The company is focused on maximizing synergy created by combining its electric component business including digital /analog tuners, optical disc drive motors, and RF components with technology and business skill sets. LG Innotek is also growing as the world's best in mobile components, display components, wireless communication components and automotive electronics components. LG Innotek is continuously challenging itself to expand the horizon...

The Bridgelux SMC LED design will enable manufacturers to bond the chip directly onto the printed circuit board (PCB), eliminating the need for an additional substrate or traditional  led high bay light . The company says that its chip design provides a high flux density LED with an ultra small footprint and thin profile. It reportedly allows the ability to closely pack multiple chips together for increased performance in applications with limited space such as camera flash, LED light backlighting and general or specialty lighting applications. The design of this chip also has a flat surface for direct deposition of a phosphor layer on the LED die. "This new patent award demonstrates Bridgelux's focus on driving innovation in core technologies to improve performance and reduce the cost of our lighting technologies," noted Bridgelux's director of R&D, Steve Lester. "The company is aggressively adding to its intellectual property (IP) portfolio. Bridgelux, cu...

The company directly mounts packaged devices on an aluminum substrate can help reduce thermal resistance. Tsao notes the technology brings total junction temperature on their LED module to under 80 degrees centigrade.To avert disputes over chip intellectual property, the company builds Epistar Inc.’s chips into emitters for domestic sales and  led high bay light  chips into products for exports. Tsao says that his company’s R&D team brings together considerable talent in thermal-dissipation and optoelectronics. They can provide lighting manufacturers with tailor-made solutions. Besides, they have developed emitters in cooperation with end-product manufacturers and retailers. Major applications for the company’s emitters include MR16, sunken lamps, down lights, wash wall lamps, and streetlights. Tsao points out that high cost remains the major hurdle keeping LED from becoming a mainstream illumination source today. Comparing a 13W LED lamp with a compact fluorescent ...

The BluGlass technology allows the production of GaN-based semiconductor wafers considerably cheaper than existing processes. GaN-based wafers are used in high performance LED general lighting devices for use in homes, offices and factories that are more energy efficient than traditional incandescent or fluorescent bulbs and tubes.CIPS Executives visited  led high bay light  pilot manufacturing plant in late December before the distribution deal was signed. BluGlass CEO Giles Bourne said BluGlass was progressing well on its long-stated plan to commercialize the GaN technology, which was developed by scientists at Sydney’s Macquarie University. BluGlass will sell their semiconductor manufacturing equipment to the Japanese market through Itochu. They are also hoping to negotiate strategic collaborations with Japanese corporations so that they can further develop uses for their technology.Energy efficient lighting pioneer BluGlass Ltd and Itochu Plastics Inc. (CIPS), a wh...

In addition to LED fingerprint sensors, Validity also offers different color sensors. Validity was the industry innovator and leader to provide custom colorized fingerprint sensors to satisfy customers’ increasing requirements for customization and end consumers’ desire for improved aesthetics.Validity’s fingerprint solutions are already shipping in numerous notebook PCs and PC peripheral devices offered by companies such as  led high bay light , Acer and General Dynamics.Orb's president David Jenkins stated from their testing that SSL products exist that exceed the ANSI standard's limits is clear. ANSI's RP-27 describes the 'blue light photo-biological hazard' as the 'potential for a photochemically induced retinal injury resulting from radiation exposure primarily between 400 nm and 500 nm. Since the hazard levels in the standard are specific to the operating conditions of radiating products. The company says that it is essentially impossible for LED compone...