Skip to main content

the use of proper classification standards in differing markets

In addition to LED fingerprint sensors, Validity also offers different color sensors. Validity was the industry innovator and leader to provide custom colorized fingerprint sensors to satisfy customers’ increasing requirements for customization and end consumers’ desire for improved aesthetics.Validity’s fingerprint solutions are already shipping in numerous notebook PCs and PC peripheral devices offered by companies such as led high bay light, Acer and General Dynamics.Orb's president David Jenkins stated from their testing that SSL products exist that exceed the ANSI standard's limits is clear. ANSI's RP-27 describes the 'blue light photo-biological hazard' as the 'potential for a photochemically induced retinal injury resulting from radiation exposure primarily between 400 nm and 500 nm.

Since the hazard levels in the standard are specific to the operating conditions of radiating products. The company says that it is essentially impossible for LED component manufacturers to provide conclusive eye safety information specific to the end product implementation of their parts because the information would be different for each end product that the LED components are in. The company contends that for this and other reasons, it is critical that product manufacturers incorporating LEDs properly test and label their products for their intended system application.

Orb Optronix offers product evaluation to the ANSI/IESNA RP-27 Recommended Practice for Photobiological Safety for Lamps and Lamp Systems, IEC 62471 (CIE S009) and IEC 60825-1 as a service to the LED and Solid State Lighting communities. In addition to its measurement services related to current standards, Orb Optronix works closely with medical physicist David Sliney, Ph.D., an expert in photo-biological safety, to provide additional in-depth analyses.Until recently, there was confusion among manufacturers about the use of proper classification standards in differing markets. For instance, in some countries, products containing LEDs required a classification under a product standard intended for lasers, not LEDs. Fortunately, the recently published second edition of this laser product standard, which was sometimes difficult to apply to LEDs, no longer includes LEDs in its scope.led high bay light replaces IEC 60825-1 internationally for LEDs and provides methods to assess the risk of LEDs by classifying their risk group and is a "dual-logo" standard with CIE S009.

Comments

Popular posts from this blog

Semiconductor lighting industry in Shenzhen develops rapidly in recent years

Orion’s LED fixture, designed to perform at temperatures as low as -20 degrees Fahrenheit, has been retrofitted in more than 3 million square feet of freezer and cold-storage space in facilities across the nation in the past several months. Companies with Orion LED technology in their facilities include US Foods, Sysco, Americold, and Save-A-Lot. The three approved Orion LED fixture models vary based on application-specific lens configuration. Orion’s LED fixtures are designed to replace traditional high intensity discharge and T8 and T5 fluorescent fixtures. Orion’s LED fixtures use 123 watts compared to 400-watt HIDs and 298-watt fluorescents. According to its Web site, the DLC is a collaboration of utility companies and regional energy efficiency organizations committed to raising awareness of the benefits of efficient lighting in commercial buildings. In order to be included on the DLC’s QPL, a product must meet or exceed specific industry standards. QPL inclusion is required for c...

This closes a gap with the very large goniometers

In addition, Shih said that the requirement will be more flexible than the existing ceiling of 10% stake owned by Chinese investors in existing enterprises and stricter than the 50% ceiling in new joint ventures.The third-wave mainland Chinese investments have been approved by Taiwan Executive Yuan (the Cabinet) and are scheduled to take effect by the end of March. The LGS 250 was developed specifically for the analysis of angle-dependent spatial radiation properties from small to medium-sized SSL luminaires, lamps and LED modules. This closes a gap with the very large goniometers. The horizontal alignment of the Type C coordinate system facilitates a particularly convenient and compact test setup for the system. Measurements can be taken in a range of +/- 160° in the forward direction of the test specimen which may have a maximum diameter of up to 480 mm and a maximum weight of 8 kg. Combined with a spectroradiometer from Instrument Systems, all spectral quantities such as color coord...

LED recessed downlighting options for general lighting in commercial

Cooper Lighting, a division of Cooper Industries plc (NYSE: CBE), has expanded its Halo LED H7 Collection offering additional choices in LED color temperatures and higher lumen options. The 6” LED downlight product line expansion–from the original Halo LED 600 Series–now includes the Halo LED 900 Series and Halo LED 1200 Series, offering a wide and versatile selection of energy-efficient LED recessed downlighting options for general lighting in commercial, retail, institutional and residential applications. Designed for new construction projects or to retrofit existing 6” nominal compatible housings (with an Edison screw base adapter included with the module), the Halo LED H7 Collection features excellent color rendering (80 CRI) and offers the industry’s widest selection of color temperatures (2700K, 3000K, 3500K and 4000K). The superior optical design yields productive beam lumens providing smooth, even illumination, excellent cutoff and extremely low glare. Consuming less than 15W, ...